Our services
Our mechanics are fully trained to work with Shimano, Sram and Campagnolo mechanical and electronic parts. We use original parts and perform our work with the best tools from Wera, Pedro’s, ParkTool, Campagnolo and Abbey Tools. See our catalogue of workshop services here below.
When you need reassurance
Safety check
- Bike checked for wear e.g. drivetrain, tyres
- Full nut and bolt check and torqued to manufacturers settings
- Chain lubricated
- Gears and brakes adjusted as necessary
- Tyres pumped to recommended psi
60 €
Recommended every 6 months or 2500 km
General service
- Bike checked for wear and replacement parts fit as part of service if necessary
- Drivetrain stripped, degreased and re-greased where necessary
- Frame and forks wiped down
- Wheels trued if necessary and cleaned
- Bottom bracket removed, degreased and re-greased (if threaded)
- Brakes and gears adjusted
- Seatpost removed, degreased and re-greased
90 €
Recommended every 12 months or 5000 km
Full service
- Bike checked for wear and replacement parts fit as part of service if necessary
- Drivetrain stripped, degreased and re-greased where necessary
- Frame and forks wiped down
- Wheels trued if necessary and cleaned
- Bottom bracket removed, degreased and re-greased (if threaded)
- Brakes and gears adjusted
- Seatpost removed, degreased and re-greased
- All bearings (headset, hub, bottom bracket) removed, degreased and re-greased/replaced where necessary
160 €
Road / Gravel
Custom bike builds
We are ready to build your dream bike from scratch. We work with SRAM, Shimano and Campagnolo mechanical and electronic parts. We will assess the needed work and give you a personal quote based on the requirements. Please note that we work with new parts only.
Starting from 250 €
